NASA Standards by Topic

Document ID
Lighting Design, Operation, and Maintenance Standard for Energy Conservation SSTD-8070-0085-EMCS
Applying Data Matrix Identification Symbols On Aerospace Parts (Superseding NASA-STD-6002C) NASA-STD-6002
Machine Shop Tolerances SSTD-8070-0098-SHOP
Space Telecommunications Radio Systems (STRS) Architecture Standard Rationale NASA-HDBK-4009
Bourdon Tube Pressure and Vacuum Gauges for use in Facility Piping or Tubing Systems SSTD-8070-0094-COMPNTS
Standard For JSC Lead-Free Control Plans (LFCP) JSC-66491
Fracture Control Requirements For Spaceflight Hardware (Superseding NASA-STD-(I)-5019 (INTERIM) And NASA-STD-5007) NASA-STD-5019
HVAC & Domestic Hot Water Design SSTD-8070-0084-EMCS
Annex To NASA-STD-8719.24, NASA Expendable Launch Vehicle Payload Safety Requirements: Requirements Table NASA-STD-8719.24-ANNEX
Relief Devices – Inspection and Recertification SSTD-8070-0097-TEST
For the Development of an Electrostatic Discharge Control Program for ANSI/ESD S20.20
Generic Standard on Printed Board Design IPC-2221A
Sectional Design Standard for Flexible Printed Boards - Supersedes IPC-D-249 IPC-2223A
Design, Installation and Maintenance of Sitewide Natural gas distribution System SSTD-8070-0092-FLUIDS
Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies IPC-2225
Generic Performance Specification for Printed Boards IPC-6011
Component Servicing Documentation SSTD-8070-0006-CONFIG
Stainless Steel Vent Pipe “Z” SSTD-8070-0128-PIPE
Qualification and Performance Specification for Rigid Printed Boards IPC-6012A
Qualification and Performance Specification for Flexible Printed Boards IPC-6013A
Qualification and Performance Specification for Organic Multichip Module (MCM-L) Mounting and Interconnecting Structures IPC-6015
Workmanship Standard For Polymeric Application On Electronic Assemblies (Revision A With Change 2 Of 3/29/2011) NASA-STD-8739.1
Microwave End Product Board Inspection and Test IPC-6018
Requirements for Soldering Fluxes J-STD-004
Controls and Instrumentation Cable Testing Standard SSTD-8070-0096-TEST
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications J-STD-006
General Environmental Verification Standard GSFC-STD-7000
Electrical Ground Support Equipment, Installation And Assembly, Specification For KSC-E-166